: * Do not use any lubricant other than that specified.
| : | Feb 23, 2007 |
| Item | Specification |
| * Recommended lubricant | Shell M13754. Land Rover Part No. TYK500050 |
| + Torque converter nose | Molybdenum disulphide grease to specification FB180 |
|
: * Do not use any lubricant other than that specified.
|
|
: + Do not over lubricate. |
| Item | Capacity |
| + Initial dry fill | 9.5 litres (16.7 pints) (10.0 US qts) |
|
: + A final fluid level check/drain down/top-up must be carried out when
the unit has been installed. |
| Item | Specification |
| Automatic transmission | ZF 6HP26 |
| Speeds | 6 Forward, 1 Reverse |
| Gear ratios: |
| First | 4.17:1 |
| Second | 2.340:1 |
| Third | 1.521:1 |
| Fourth | 1.143:1 |
| Fifth | 0.867:1 |
| Sixth | 0.691:1 |
| Reverse | 3.403:1 |
| Torque converter | Sachs W260 2GWK with slip controlled, dual friction faced lock-up clutch |
| Transmission control module: |
| Location | Located in transmission casing |
| Type | 1904 |
| Description | Nm | lb-ft |
| Transmission fluid filler/level plug | 35 | 26 |
| Transmission fluid drain plug | 9 | 7 |
| Selector lever nut | 12 | 9 |
| Selector cable bracket bolts | 10 | 7 |
| Main control valve body Torx screws | 8 | 6 |
| Fluid pan Torx screws | 8 | 6 |
| Engine RH support bolts | 45 | 33 |
| Transmission heat shield bracket bolts | 10 | 7 |
| Transmission heat shield bolts | 10 | 7 |
| Wiring harness bracket Torx bolt | 10 | 7 |
| Torque converter bolts | 45 | 33 |
| Transmission bolts | 45 | 33 |
| Radiator access panel bolts | 10 | 7 |
| Breather pipe clip bolt | 25 | 18 |
| Fluid line clip bolt | 10 | 7 |
| Fuel pipe heat shield bolts | 10 | 7 |
| Transmission under shield bolts | 10 | 7 |
| Transmission support insulator | 60 | 44 |